
Add to Cart
36t Large Fully Hydraulic Single Drum Vibratory Road Roller XS365 Construction Road Roller
Features of 36t Large Fully Hydraulic Single Drum Vibratory Road Roller XS365 Construction Road Roller
(1) Engine
Equipped with Weichai National III water-cooled engine, it has large power reserve, low fuel consumption and low noise.
(2) Hydraulic walking drive system
A single pump dual motor closed hydraulic drive system composed of an electronically controlled proportional pump, a dual variable motor, and a long-life reducer realizes full drive of the front and rear wheels to ensure that the roller has good driving performance and climbing ability.
(3) Transmission system
The domestic heavy-duty drive axle has strong bearing capacity and high reliability, and can ensure that the roller can exert its maximum traction under various working conditions. Equipped with 20-layer rock-type tires, it is wear-resistant and especially suitable for rock-fill compaction.
(4) Hydraulic vibration system
Dual-frequency, double-amplitude, scientific and reasonable static line load and excitation force configuration ensure effective compaction of different types of materials and different thicknesses of pavement.
(5) Vibration wheel
The vibrating wheel is the core component of the vibratory roller.
The vibration wheel follows the structure of the four-point support cylindrical vibration chamber, and uses the long-life vibration wheel design technology and the "three-in-one" extreme pressure equalization technology. According to the dam compaction requirements, the parts of the vibration wheel of this product are further adapted to enhance the compaction ability of the dam's ultra-thick layer.
Specification of 36t Large Fully Hydraulic Single Drum Vibratory Road Roller XS365 Construction Road Roller
Item | Unit | XS365 | |
Weight | Operating weight | kg | 36000 |
Distributed mass of front drum | kg | 24000 | |
Distributed mass of rear drum | kg | 12000 | |
Static linear load | kg/cm | 1000 | |
Driving performance data | Driving speed (gear I) | km/h | 0~4 |
Driving speed (gear II) | km/h | 0~5 | |
Driving speed (gear III) | km/h | 0~5.5 | |
Driving speed (gear IV) | km/h | 0~10.4 | |
Theoretical gradeability | % | 40 | |
Minimum turning radius | mm | 7060 | |
Tire specification | - | 23.5-25-20PR | |
Ply rating | - | 20 | |
Air pressure | kPa | 300~375 | |
Power system | Engine manufacturer | - | WEICHAI |
Type | - | WP12G375 | |
Rated power | kW (hp) | 276 | |
Rated speed | rpm | 2200 | |
Voltage | V | 24 | |
Vibration system | Vibrational frequency | Hz | 26/31 |
Nominal amplitude | mm | 2.3/1.2 | |
Exciting force | kN | 730/540 | |
Volume | Machine oil | L | 22 |
Fuel tank | L | 600 | |
Hydraulic tank | L | 200 | |
Coolant | L | 59 | |
Front drum chamber | L | 60 | |
Front drum reducer | L | 7 | |
Axle | L | 35 |
Packing and Delivery:
Packing: waxing on the appearance of the trucks or nude packing.
Delievery: 20 days after receiving deposit
Payment term: 30% deposit, 70% balance payment delivery after receipt.
Shipping: usually by RORO or BULK vessel,can also by 40FR container,some small trucks can be fitted into 20GP or 40HQ
container.Will give you the best case for transportation.