50T Telescopic Truck Crane XCMG QY50KA 50 Ton Hydraulic Heavy Lift Truck Crane
Product Description of 50T Telescopic Truck Crane XCMG QY50KA 50 Ton Hydraulic Heavy Lift Truck Crane
XCMG Official QY50KA 50 ton hydraulic heavy lift truck crane
XCMG QY50KA truck crane's structure is compact, the industry operating performance is the highest. Lifting performance and driving performance of a comprehensive upgrade, leading competitors. Advantages and highlights: 1. Five section U-type booms. The boom length is 11.4m-43.5m with strong lifting performance, leading 5%-10% ahead of products with the same tonnages in the same industry. High-power engine with good dynamic performance, strong gradeability and superior trafficability. The maximum gradeability and maximum travel speed respectively are 42% and 85km/h. 2. Waterproof connector clip is equipped with rubber sheath inside with excellent water impervious and level of protection reaches to IP65. The air-conditioning condenser is separately installed, the heat-sinking capability is sharply improved and the environment temperature reached to more than 45℃. 3. The boost system will work only by stepping on the clutch that effectively avoids gearbox damaging gears when shifting. Compared with the same industry, 100mm distance of shift gears and 45% of shifting force are respectively reduced.
Specification of 50T Telescopic Truck Crane XCMG QY50KA 50 Ton Hydraulic Heavy Lift Truck Crane
Item | Unit |
| Dimensions | Overall length | 13770 | mm |
| Overall width | 2800 | mm |
| Overall height | 3570 | mm |
| Weight | Dead weight in travel state | 41000 | Kg |
| 1st axle load | 7500 | Kg |
| 2nd axle load | 7500 | Kg |
| 3rd axle load | 13000 | Kg |
| 4th axle load | 13000 | Kg |
| Power | Engine model | WD615.334 WP10.375 | |
| Engine rated output | 247-275/2200 | Kw(r/min) |
| Engine rated torque | 1350-1500(1300~1600) | N.m(r/min) |
| Travel | Max.travel speed | 80 | Km/h |
| Min. turning diameter | 24 | m |
| Min. ground clearance | 291 | mm |
| Approach angle | 17 | . |
| Departure angle | 11 | . |
| Max. gradeability | 40 | % |
| Fuel consumption of per 100km | 42 | L |
| Lifting performance | Max. total rated lifting load | 50 | t |
| Min. working radius | 3 | mm |
| Turning radius at swing table tail | 3482 | m |
| Base boom max. load moment | 1822 | Kn.m |
| Base boom | 11.3 | m |
| Full- extended boom | 42.7 | m |
| Full-extended boom+ jib | 57.7 | m |
| Outrigger longitudinal distance span | 5.91 | m |
| Outrigger lareral distance span | 6.9 | m |
| Working speed | Boom elevating time | 40 | s |
| Boom telescoping time | 80 | s |
| Max. slewing speed | 2 | r/min |
| Main winch max. speed(no load) | 130 | m/min |
| Auxiliary winch max. speed(no load) | 120 | m/min |
Photo of 50T Telescopic Truck Crane XCMG QY50KA 50 Ton Hydraulic Heavy Lift Truck Crane
FAQ
Q: How do you ensure the quality of product?
A: Our Factory is standard production workshop, got ISO CCC BV Certification, our workers are well trained. Our very product under goes a scrutinizing inspection process.
Q : Can you satisfy my special requirement?
A: Definitely ! We are located in manufacturer and we have strong producing capacity and R&D capacity!
Q : How about your warranty item?
A: We can support you with original spare parts, and email or telephone assistance in the following days. If necessary, our experienced engineer can go abroad to your place for technical support.
Q: How about the delivery time?
A: for stock trucks, we can delivery within 7 days, if the trucks are placed by order, we can finish production within 45 days, if specially ordered, We always need around 60 days for production.
Q: I want to transport the truck by container, is it ok?
A: Yes, it is ok .But we need take apart the truck. You should reinstall in your country. Or we ship it by rack flat deck container, if the whole length of the vehicle is below 12m
Q: How do you ensure the quality of product?
A: Our Factory is standard production workshop ISO CCC BV Certification , our workers are well trained. Our very product under goes a scrutinizing inspection process.
Q: I want to be your agent in my country , is that ok?
A: It’s ok, If your quantity is big, we will consider. For the first time 50 units is ok.
Q: I want the front two tyres are bias tyre and the rear 9 tyres are radial tyres, is it ok?
A: We can make the tyres as your requirement to suit your country's need.
Q: how to pay for the vehicles
A: Normally , we can accept T/T or L/C at sight payment terms.
Q: Can I get whole truck spare parts after using?
A: of course, we can provide all original spare parts for our machines
