Special Purpose Truck 10m3 Swing-Arm Garbage Truck DF or HOWO 4x2 Chassis 226hp
Introduction of Special Purpose Truck 10m3 Swing-Arm Garbage Truck
The swing arm garbage truck adopts Dongfeng, Jiefang, Howo and other chassis to be equipped with uniform supporting hydraulic lifting assembly. The left and right arms are used to transport the nation's unified swing arm garbage hopper. , Reliable performance. The garbage bin body is divided into swing arm type and pit ground dual-purpose configuration. Different types of garbage hoppers can be installed with sealing covers to prevent leakage and flying pollution to adapt to different environmental use requirements. It adopts domestic advanced technology and military industrial accessories. The quality is reliable, and the manufacturer can provide the user with a drawing of the garbage bucket to assist the user in designing the garbage collection and transfer program.
Features of Special Purpose Truck 10m3 Swing-Arm Garbage Truck
1. Swing arm mechanism: The swing arm mechanism is composed of a steel plate and is a box-shaped structural member. Its main function is to drive the swing arm to rotate around the shaft by a multi-way valve operating oil cylinder, and its rotation angle is 145 °, which can raise the hopper, and Tilt the hopper.
2. Garbage bins: Garbage bins are metal welded parts in two forms: open and sealed. When the bulk goods are loaded into the trash bin, hang the lifting chain, and the trash bin can be lifted onto the truck by operating the swing arm. When unloading, operate the swing arm to lift the garbage bin. After landing, remove the hanging chain at one end to operate the garbage bin to discharge. The large tipping angle of the bin can reach 86 °.
3. Hydraulic system: It is composed of oil tank, oil pump, multi-way directional valve, hydraulic cylinder, balance valve, hydraulic lock, oil filter and pipeline. The entire system is powered by the automobile gearbox and power take-off, and the manual multi-way directional valve controls the outrigger cylinder and swing arm cylinder for telescopic movement. The displacement of the oil pump of this system can be adjusted under the vehicle by manual throttle. The manual reversing valve handle controls the stroke of the valve rod to control the movement speed of the piston rod of the cylinder. The system pressure can be set by the safety relief valve. Flow valve overflow.
4. Operating system: Through the system to achieve the conversion of various functions. Before operating the multi-way directional valve, the power take-off should be hung to drive the oil pump.
5. Garbage bin can be lifted up and down automatically, swing arm once working cycle time: 60S. The characteristic of this vehicle is that the cargo hopper is separated from the car body, which can realize the joint operation of one car and multiple cargo hoppers, and cyclic transportation. It is suitable for the cleaning and transportation of urban garbage.
Technical specification of Special Purpose Truck 10m3 Swing-Arm Garbage Truck
| Total mass (kg) | 15800 | Tank volume (m3) | 10-12 |
| Rated mass (kg) | 9005 | Dimensions (mm) | 7300,8000,8200, 7450X2500X3360,3420 |
| Curb weight (kg) | 6600 | Cargo compartment size (mm) | XX |
| Approach angle / departure angle (°) | 20/14 | Front / rear suspension (mm) | 1430/2070 |
| Axle load (kg) | 5600/10200 | Maximum speed (km / h) | 98 |
| Correspondence between vehicle length and wheelbase:7300/3800,7450/3950,8000/4500,8200/4700. |
| Chassis |
| Chassis model | ZZ1167M4611 | Chassis type | Cargo chassis |
| Brand name | HOWO | manufacturer | Sinotruk |
| Axles | 2 | Number of tires | 6 |
| Wheelbase (mm) | 4600 |
| Tire specifications | 295/80R22.5(11/12/315) |
| Number of leaf springs | 9/9+6,10/9+6 | Front wheel track(mm) | 2022 |
| Fuel type | Diesel | Rear wheel track(mm) | 1830 |
| Emission standard | Euro III |
| Engine model | Brand | Engine displacement | Power |
| WD615.62 | Sinotruk | 9726ml | 266hp |
Packing and Delivery:
Packing: waxing on the appearance of the trucks or nude packing.
Delievery: 20 days after receiving deposit
Payment term: 30% deposit, 70% balance payment delivery after receipt.
Shipping: usually by RORO or BULK vessel,can also by 40FR container,some small trucks can be fitted into 20GP or 40HQ
container.Will give you the best case for transportation.
