High Strength Truck Spare Parts Tipper Single Acting Telescopic Hydraulic Cylinder
Truck Spare Parts Tipper Single Acting Telescopic Hydraulic Cylinder
Product Description of Truck Spare Parts Tipper Single Acting Telescopic Hydraulic Cylinder
High Strength
1. Joint development of new high-strength steel pipes with well-known domestic special steel enterprises
2.Increase Work pressure
High Performance
1. On average, about 20 seconds faster than similar products
2. Reduced working time by 19%
Light Weight
1. The lightest weight to win the biggest lift
2. Steel pipe and hydraulic combined weight loss is about 17%
3. Working oil volume reduced by 16%
Excellent Design
1. Optimized design, cylinder bore is reduced, working pressure is increased
2. Using imported brand seals
3. Respond to two kinds of severe conditions of high temperature and low temperature
4. Can adapt to -40 °C -110 °C working temperature
5. Apply five utility model patents
Main Features of Truck Spare Parts Tipper Single Acting Telescopic Hydraulic Cylinder
| Product parameter list |
| Product model | 4TG-F202*6180 |
| Stroke (mm) | 6180 |
| Rated pressure (Mpa) | 20 |
| Lower hinge axis (mm) a×b×g | 280,410,65 |
| Upper hinge shaft (mm) c×d×g | 360,490,65 |
| Installation height L (mm) | 1865 |
| Bottom distance L1 (mm) | 85 |
| Connector type | G1 |
| Lifting force (T) | 64 |
| Lifting angle | 47°~52° |
| Cylinder volume (L) | 151 |
| Suitable for large boxes(mm) | 7500-8200 |
The photo of Truck Spare Parts Tipper Single Acting Telescopic Hydraulic Cylinder
FAQ
Q1: What's the brand name of your products ?
A: Generally, we use our own brand "Vanb",OEM is also available as required.
Q2: Hydraulic cylinder internal leakage?
A: There are 3 main reasons causing internal leakage :Overload, polishing is not well controlled, bad seal kits. As is known to all, vehicles in China are often overload, our products all designed to bear the overload power. We have numerical control machine to assure the polish processing .And we use the imported seals to meet customers' demands.
Q3: Is your design reasonable? What about your product safe coefficient?
A: We have R&D team with abundant design experience. We also established production, education, and research cooperation with universities . Rest assured.
Q4: What about the quality feedback of your products?
A: Guarantee the quality from the raw material. We have cold drawing production line and nickel-chrome electroplating production line , so we can produce cold-drawing pipe and hard-chrome pipe used for hydraulic cylinder. !!!
Q5: How about the delivery time?
A: Over 700 sets advanced equipment’s to meet customer's large demand in short delivery time. Generally ,it's 7-15 days.
Q6: What 's the after-service?
A: If the quality can’t meet your requirement ,we will pay all your lost and offer technical support to solve your problem!!!
