14.2m2 Heavy Duty Semi Trailers Fuwa Axles Enclosed Vehicle Rated Load 40t
Sinotruk 14.2m 2 Fuwa Axles Enclosed Vehicle Transport Car Carrier Semi Trailer Rated Load 40t
Introduction of Sinotruk 14.2m 2 Fuwa Axles Enclosed Vehicle Transport Car Carrier Semi Trailer
Vehicle transport semi-trailers can be made in different lengths according to customer needs. The frame is a welded I-beam. The entire body is fully automatic submerged arc welding and carbon dioxide gas shielded welding. After the welding is completed, shot peening is performed to eliminate welding stress and improve the adhesion of the paint surface, so that the quality is stable and the appearance is beautiful. The upper chassis can be divided into two to three pieces, and the height can be adjusted by hand hoist and oil cylinder. The closed front panel is made of stamped small corrugated sheet skin, the side is made of small corrugated sheet or stamped corrugated sheet skin, and tops are equipped with tent poles and tarpaulins. The vehicle is equipped with a tool box, a spare tire frame, and a drip brake system is installed to improve the safety of vehicle transportation.
Advantages of Sinotruk 14.2m 2 Fuwa Axles Enclosed Vehicle Transport Car Carrier Semi Trailer
- Reliability: Because the axle is near the center of the trailer, most of the trailer's weight is borne by itself, and the vertical load transmitted to the tractor is small. Traditional semi-trailers have most of the weight. Press on the saddle of the tractor. The characteristics of the small vertical load of the center axle can ensure the smooth operation of the center axle train and ensure the safety of the transport vehicle.
- Passability: The length of the central axle trailer is generally short, generally around 10 meters, and the length of traditional semi-trailers is between 13 meters and 16 meters. Relatively speaking, the turning radius is smaller and the vehicle is more flexible. This is why it is also 22 meters, and the country chooses to promote the mid-axle model instead of the semi-trailer.
- Flexibility: The tractor and trailer of the center-axle train can be separated, and the tractor also has space for loading the vehicle. In particular, it can be used to transport vehicles in the urban area to the 4S shop. Taking off the trailer can run more flexibly on urban roads.
- Safety: The center axle train is a type of full trailer. The current model of the center axle is different from the previous domestic trailers. Older trailers have two hinge points. The stability of the vehicle is relatively poor. It is also particularly difficult to have more moving points; the new mid-axle train has only one articulation point to connect, and the stability is much higher than that of the old full trailer, and it is safer to drive at high speed. With the cooperation of electronic auxiliary system, the safety is no different from that of semi-trailer.
5. Versatility: Since the center axle train has only one articulation point, which is consistent with the semi-trailer tractor, the method of reversing is the same as that of the semi-trailer. The driver who transitions from the semi-trailer to the center axle train does not need to spend a lot of energy to learn new The reverse method only needs to adapt to the difference in driving trajectory caused by the change of vehicle length.
Parameters of Sinotruk 14.2m 2 Fuwa Axles Enclosed Vehicle Transport Car Carrier Semi Trailer
| Rated Load | 40000 kgs |
| Tare Weight | 12000 kgs |
| Wheel Base | 6900+1310 (mm) |
| Tyre Specifications | 12R22.5 |
| No. Of the Tyres | 8 |
| Axle Brand | FUWA 2x13t |
| No. Of the Axles | 2 |
| Axle-load | 13000 kg |
| King Pin | 2' or 3.5' |
| Landing Leg | 2 |
| Pieces of leaf-spring | 10 |
| Suspension | Steel leaf spring suspension |
| Departure Angle | 14.5 |
| Front/Rear Overhang | 2120 mm |
| Outside Dimensions (LxWxH) | 14200X2500X3800 (mm) |
| Material of the Main Beam | Q345B |
| Brake System | Dual line braking system /ABS |
| Brake Air Chamber | double chamber |
| Electrical | 24V 7 ways(7 wire harness) |
| Color | Any color will be available |
| Accessory | One tooling box with a set of standard trailer tool |
FAQ:
1. How do you transport the semi trailers?
We transport the semi trailers by bulk or container. Our factory possesses long-term cooperation with ship agency which can provide you lowest shipping fee.
2. Can you satisfy my special requirement?
Definitely! We are direct manufacturer and we have strong producing capacity and R&D capacity!
3. How can you guarantee quality?
Our raw material and OEM parts including axle, suspension, tyre, are purchased centralized by CIMC group,
every node will be inspected strictly. Moreover, advanced equipment rather than only worker is been applied during the whole producing process to ensure the welding quality.
