FD30 Lonking Diesel Forklift Truck 3 Ton Min Lifting Height 2150mm 39KW
FD30 Lonking Diesel Forklift Truck 3 ton forklift FD30 Min. Lifting Height: 2150mm
Product Description
1. New dynamic balancing design technology is adopted to make the center of gravity move backward, greatly improving the load capacity and the safety of load driving.
2. High flow cyclone air filter is perfectly combined with national III emission engine, Low noise, energy saving, environmental protection and greatly improve the efficiency of the whole machine.
3. The overhead guard is welded integrally, and the rear beam is fixed to reduce the vibration of the whole machine.
4. The design of the position of the joystick is more in line with ergonomic principle, which can reduce the fatigue of the driver. Large-angle steering wheel and adjustable seat can meet different driving needs. Digital instrument intelligence which is added the latest voice prompt.
5. The design of heat dissipation system and air duct is optimized to ensure the efficiency and energy saving of the whole machine. The overall design of the frame is optimized and strengthened to reduce the vibration of the whole machine, enhance the strength of the frame and extend the service life of the whole machine.
| Engine | Equipped with xinchaic490 engine which has which have a power energy and energy Conservation, |
| | It has fast and reliable ignition,low fuel consumption and powerful motivity, sing direct injection technique.2 |
| | It has good reliability and long work life-time. |
| | low noise and emission meeting the requirements of European E-Mark IIIA Regulations. |
| Pipeline: | high pressure oil line use the first brand oil tube .it has excellent resistance which can ensure its long service life |
| Hydraulic system: | double pump confluence, small system flow,low pwer consumption, reliable performance excellent operating performance |
| Cabin | wirth air conditioner and heating and heating and repture embrace explosion proof wide view and comfortable seats and flexible control |
| | Mast box_type internal extent mast special all –round bearing in creasing the lifting performance |
| Fork : | use the cascade fork with hydraulic fork positoner easy operation and reduce drivers’ labor intensity |
| Steering axle: | Adopt transverse oil cylinder type bridge full hydraulic flexible and light reliable transmission |
| | Torque improved technology reliable performance convenient mainatenance Smooth transmission and convenient operation |
| Control system | pilot valve control device to make the work efficiently which can reduce the drivers labor intensity |
| Tyre: | high class brand pneumatic tyre resistance to wear and sting high strengths tyre it can bear the heavy laoded ,safe and reliable |
Main Parameter of FD30 Lonking Diesel Forklift Truck 3 ton forklift FD30
| MODEL | LG30DT |
| Power type | Diesel |
| Rated capacity (Kg) | 3000 |
| J Load centre (mm) | 500 |
| h1 STD Max lifting height (mm) | 3000 |
| h3 Free lifting height (mm) | 125 |
| L5*W*T STD Fork size (mm) | 1070×125×45 |
| L3 Front overhang (mm) | 487 |
| L4 Rear overhang (mm) | 550 |
| Overall dimension | |
| L1 Overall length(mm) | 3850 |
| W1Overall width (mm) | 1250 |
| h2 Mast lowered height (mm) | 2132 |
| h4 Overhead guard height (mm) | 2150 |
| R1 Min.turning radius (mm) | 2520 |
| Min .intersecting aisle (mm) | 4200 |
| Speed(load/unload) | |
| Max.traveling speed (km/h)(F/R) | 20/18.5 |
| Max,lifting speed (mm/s)(load/unload) | 450/485 |
| Max.gradient (%) | 20 |
| Dead weight (kg) | 4200 |
| S/P Tread(frnt/rear)(mm) | 1030/960 |
| L2 Axle distance (mm) | 1750 |
| Min.ground clearance | |
| m2 Mast (mm) | 132 |
| m1 Frame (mm) | 165 |
| STD Engine | Xinchai C490 |
| Rated power(kw) | 36.8 |
Product Photos
1.By Container This is the cheapest and fast one we will disassemble and load the machine in a container for you.
2.By flat rack: This method is often used to ship wheel loader, max load-bearing is 35 tons.
3.Bulk cargo ship: This method is used for bigger construction equipment , no need to disassemble the machine
4.RO RO ship: The machine is driven directly into the ship.
Up on to your request we will choose the most suitable method for you.
All photos and data are accurately and timely provided.
All machines are imported legally with complete
Contact us
If you have interest in any of machines ,welcome to Shanghai China and visit our company ,we would like to show you around our yards and our city, tell you some detailed introductions about our products , We will do our best to make you satisfaction , you just think it is a tour for fun and make your visit like homing..
Packaging & Shipping
1, Wax:
Do swax protective measures to against the trailer body suffer seawater corrosion during shipping.
2, Tarpaulin
It can effectively prevent the goods in the sun and rain during transport
FAQ
Q: Are you Dealer or Factory ?
A: We are the subsidiary factory of Sinotruk and adopt the strict quality control system which the high quality of the truck.
Q : What is your advantages ?
A : We are the subsidiary factory of Sinotruk and we adopt the strict quality control system during the production which makes the high quality truck.
B: We are directly factory we can meet all the requirements form customers and provide a better technical support to customers.
Q : I want to transport the truck by container, is it ok?
A: Yes, it is ok .But we need take apart the truck .You should reinstall in your country.
Q : How about your product quality ?
A: All our spare parts are from the original manufacturers, the quality is 100% guaranteed.
Q : I want to be your agent in my country , is that ok?
A : It’s ok, If your quantity is big, we will consider. For the first time 50 units is ok.
Q. How about your company's service, especially after-sale service ?
A: SINOTRUK has been in this field for nearly 60 years and has strong production and distribution capability, we can satisfy your demand within 3-7 days. We always do our best to solve all the problems and put our customer's interests in the first place.
Q : What is your payment terms?
A : You can choose to the 30% prepaid and 70% paid before delivery or you can choose the LC 100% at sight.
Q : What is your lead time ?
A : Usually it is 30-50 days after deposit received.
