Sinotruk Howo Concrete Handling Equipment 33m3 Bulk Cement Fly Ash Powder Tank Truck
Introduction of Sinotruk Howo Concrete Handling Equipment 33m3 Bulk Cement Fly Ash Powder Tank Truck
The powder material transportation truck, bulk cement truck, and dry-mixed mortar transportation truck are composed of special automobile chassis, bulk cement truck tank, gas pipeline, and automatic unloading device. It is suitable for bulk transportation of powdery dry materials such as fly ash, cement, lime powder, ore powder, granular alkali, etc. whose particle diameter is not greater than 0.1mm. It is mainly used for cement plants, cement warehouses and large construction sites, which can save a lot of packaging materials and loading and unloading labor.
Features of Sinotruk Howo Concrete Handling Equipment 33m3 Bulk Cement Fly Ash Powder Tank Truck
The tank body is made of Q235 national standard plate, body is 5mm, the head is 6mm, the effective volume of the tank body is 25 cubic meters, and the weld of the tank is a straight weld. Installed Anhui Wuhu Fuda 9.0 air compressor. Two compartments and two covers, high temperature resistant ball valve, tail light is installed at the top of the tank body, the air compressor and the gas line connecting hose are high temperature resistant outer layer with steel mesh, the check valve adopts a semi-hanging high and low check valve, plus a protective lamp cover With toolbox. With 7m unloading ash pipe, standard for other manufacturers!
- Lifting dry-mixed mortar transporter adopts air pressure discharge technology, and the structure inside the tank is novel, which greatly improves the effective capacity of the tank and reduces the residual rate of use. quality.
- Equipped with high temperature resistant ball valve, with pressure gauge, 2 safety valves, 7m discharge pipe, external gas source interface.
Technical specification of Sinotruk Howo Concrete Handling Equipment 8x4 33m3 Bulk Cement Fly Ash Powder Tank Truck
| Product name | Sinotruk Howo 8x4 33m3 Dry Powder Bulk Cement Transportation Truck |
| Chassis model | ZZ1317N4667 |
| brand | HOWO |
| Model of Engine | WD615.47 |
| Engine power(hp) | 371hp, Euro III |
| Tyre | 12.00R22, 10+1pcs |
| Axle | Front: HF9, 9000kg HC16, 16000kg |
| Wheel base(mm) | 1800+4600+1350 |
| Overall dimensions(mm) | 11990×2500×3950 |
| Tank volume(m3) | 33 |
| GVW(kg) | 31000 |
| Curb weight(kg) | 16890 |
| Approach / departure angle(°) | 12/15 |
| Specialized part | Air compressor | Type No. | WBK-9.0/2 or WBK-8.0/2 |
| Displacement m3 / min | 9.0/8.0 |
| Rated speed r / min | 950 |
| Power kw | 29 |
| Brand | Wuhu |
| Sliding bed design | 2/3 compartments |
| Tank body diameter mm | 2400 |
| Discharge speed t / min | ≥1.1 |
| Remaining rate t | ≤0.3 |
| Horizontal conveying distance m | 15 |
| Vertical conveying distance m | 5 |
| Functional description | The power of the car chassis is transmitted to the air compressor through the power take-off and the transmission shaft. The compressed air generated by the air compressor enters the gasification chamber at the bottom of the tank through the pipeline, and is mixed with the cement into a fluid state by the gasification bed and then along the ash discharge pipe Output. |
