8x4 28m3 Bulk Cement Powder Tank Truck 28-33ton Fly Ash Tanker Truck 371hp
Sinotruk Howo 8x4 28m3 Bulk Cement Powder Tank Truck 28-33ton Fly Ash Tanker Truck
Introduction of Sinotruk Howo 8x4 28m3 Bulk Cement Powder Tank Truck 28-33ton Fly Ash Tanker Truck
The upper body of the tank is made of Q235 national standard plate. The cylinder body is 5mm, the head is 6mm, the effective volume of the tank is 28 cubic meters, two warehouses and two covers, Wuhu Fuda 10.0 air compressor is installed, and a 7.2m ash discharge pipe is installed.
Technical specification of Sinotruk Howo 8x4 28m3 Bulk Cement Powder Tank Truck 28-33ton Fly Ash Tanker Truck
| Product name | Sinotruk Howo 6x4/8x4 30ton Dry Powder Bulk Cement Transportation Truck |
| Chassis model | ZZ1317N4667 |
| brand | HOWO |
| Model of Engine | WD615.47 |
| Engine power(hp) | 371hp, Euro III |
| Tyre | 12.00R22, 10+1pcs |
| Axle | Front: HF9, 9000kg HC16, 16000kg |
| Wheel base(mm) | 1800+4600+1350 |
| Overall dimensions(mm) | 11990×2500×3950 |
| Tank volume(m3) | 28 |
| GVW(kg) | 31000 |
| Curb weight(kg) | 16890 |
| Approach / departure angle(°) | 12/15 |
| Specialized part | Air compressor | Type No. | WBK-9.0/2 or WBK-8.0/2 |
| Displacement m3 / min | 9.0/8.0 |
| Rated speed r / min | 950/ |
| Power kw | 29/ |
| Brand | Wuhu |
| Sliding bed design | 2/3 compartments |
| Tank body diameter mm | 2400 |
| Discharge speed t / min | ≥1.1 |
| Remaining rate t | ≤0.3 |
| Horizontal conveying distance m | 15 |
| Vertical conveying distance m | 5 |
| Functional description | The power of the car chassis is transmitted to the air compressor through the power take-off and the transmission shaft. The compressed air generated by the air compressor enters the gasification chamber at the bottom of the tank through the pipeline, and is mixed with the cement into a fluid state by the gasification bed and then along the ash discharge pipe Output. |
Highlights of Sinotruk Howo 8x4 28m3 Bulk Cement Powder Tank Truck 28-33ton Fly Ash Tanker Truck
1. This model has a large loading capacity and widely used.
2. The material of the tank body is made of 5mm high-quality steel plate of Wuhan Iron and Steel. The head is made of 6mm steel plate for one-time die-casting. The appearance of the tank body is cylindrical, the head is hemispherical, and the protruding part of the head is nearly 300mm. . This design can effectively avoid the deformation of the tank.
3. The air compressor adopts Wuhu special vehicle-mounted air compressor of domestic famous brand. The non-lubricating swing air compressor is an ideal air unloading power specially designed for bulk cement (powder material) vehicles. Compared with other types of air compressors, it has a small size, light weight and matching speed, which is easy to install on the vehicle; It has a large displacement, and the exhaust gas is oil-free, which can meet the requirements of cement (powder material) gas unloading power; it is more adaptable to dust environment and field environment, has certain working reliability, and is basically maintenance-free; maintenance costs are also Low, so at present, almost all the domestic unloading power of bulk cement (powder material) vehicles is set as a non-lubricating swing air compressor.
4. The welding of the tank body adopts CO2 gas shielded automatic welding, the welding quality is reliable, and the appearance is beautiful.
5. The fluidized bed inside the tank adopts the "W" or "WV" type double (three) bin design, the angle of the internal walking groove is large, which increases the effective volume of the tank, at the same time greatly improves the ash lowering speed and reduces the remaining ash rate.
