Stability Construction Motor Grader 160HP GR165 Earth Moving Equipment
XCMG Construction Motor Grader 160HP GR1653 Motor Graders Small Mini Tractor Road Wheel Motor Grader
Product Description of Construction Motor Grader 160HP GR1653 Motor Graders
The motor grader is mainly used for ground leveling, ditching, slope scraping, bulldozing, scarification, snow removal for large areas such as highway, airports, farmlands etc. It is the necessary construction machinery for national defense construction, mine construction, urban and rural road construction and water conservancy construction, farmland improvement and so on.
Advantages and Highlights:
1. The articulation frame is adopted and matched with the steering of the front wheel, With small turning radius ,maneuvering and flexible.
2. The electro-hydraulic controls the power shift gearbox ,with 6ahead gears and 3 back gears.
3. The international matching hydraulic parts are adopted ,with reliable operation.
4. The motions of the blade are fully hydraulically controlled.
5. The rear axle is the three-section driving axle which is provided with the NO-SPIN self-locking differential mechanism.
6. The manipulation table and seats are adjustable. The arrangement of the manipulation handle and instruments are reasonable ,with convenient application ,and the comfort of driving is improved .
7. The cab is grand and nice ,with wide eyeshot and good sealing .
8. The front bulldozing plate, rear scarification device , front scarification harrow and automatic leveling device can be added.
Product Parameters of Construction Motor Grader 160HP GR1653 Motor Graders
| Basic specification |
| Engine model | SC7H180.1G3 |
| Rated power/speed | 128kW/2000rpm |
| Dimension(LxWxH) | 8900×2625×3420mm |
| Operating weight(Standard) | 15000kg |
| Performance specification |
| Travelling speed ,forward | 5,8,11,19,23,38 km/h |
| Travelling speed ,reverse | 5,11,23 km/h |
| Tractive force(f=0.75) | 77KN |
| Max. gradeability | 20% |
| Tire inflation pressure | 260 kPa |
| Working hydraulic pressure | 20 MPa |
| Transmission pressure | 1.3~1.8MPa |
| Operating specification |
| Max. steering angle of front wheels | ±48° |
| Max. lean angle of front wheels | ±17° |
| Max. oscillation angle of front axle | ±15° |
| Max. oscillation angle of balance box | 15 |
| Frame articulation angle | ±27° |
| Min. turning radius using articulation | 7.3m |
| Blade |
| Maximum lift above ground | 450mm |
| Maximum depth of cutting | 500mm |
| Maximum blade position angle | 90° |
| Blade cutting angle | 28°—70° |
| Circle reversing rotation | 360° |
| Moldboard width X height | 3965×610mm |
Main characteristics:
Hydraulic transmission controlled by electricity
Working equipment controlled multi valve, short operating bar, adjustable operating table, instrument No-spin(differential), planetary speed-reduction transmission system
Hydraulic brake system
Hydraulic steering system
Cabin equipped structure can make the biade tilt by 900 tum round by 3600
Air conditione
Photo of Construction Motor Grader 160HP GR1653 Motor Graders
